Author Topic: Custom Tuning GM OBD1 Systems  (Read 1378 times)

0 Members and 1 Guest are viewing this topic.

Offline xlr8n

  • Spotter
  • *
  • Posts: 389
  • Reputation +0/-0
    • Schichtel.net
Custom Tuning GM OBD1 Systems
« on: April 27, 2015, 01:51:16 PM »
Does anyone have any hands-on experience custom tuning General Motors OBD1 Systems?  I've found Tunerpro offers a few free WIndows based applications but it's a little grey as to which files are necessary for the AULS computer (Serv 16144288). Any insight would be appreciated.
Wichita Falls Weather


1973 Chevrolet Luv:
Chassis/Suspension: '72 Waggy frame cut to 103.5" WB ; Waggy front 47" SOA ; Chevy rear 63" SOA
Front axle: '79 J10 D44 4:11 w/ 8 lug outers ; chromoly shafts ; Detroit locker ; cast cover
Rear axle: '75 Corp 14 bolt welded 4:10 ; cast cover ; DOM anti-wrap bar
Tires: 38.5x14.5x15 Swamper SX on 15x8 steel wheels
Drivetrain: '92 s10 4.3 Chevy v6 ; TH350 ; NP203/205 doubler triple sticks (front digs) ; .250 DOM rear shaft ; 2" square front shaft
Steering: Hydrossist ; 1.5" OD .250 wall DOM drag link and tie rod w/ heims
Safety: In-cab DOM cage ; in-bed double roll bar
Amenities: OBA ; OBW ; electric XJ seats ; Schwinn cruise control ; rock lights ; receiver mounted 8K lb. winch ; receiver mounted BBQ pit ; receiver mounted 32cc weedablender ('rita mixer)
Other: Bed mounted Isuzu raditator ; Bobbed bed

Offline SWAN22

  • Wheeler
  • **
  • Posts: 740
  • Reputation +36/-7
Re: Custom Tuning GM OBD1 Systems
« Reply #1 on: April 28, 2015, 07:47:22 AM »
  :dunno:   :sorry:
"04" Rubicon, on 36" rubber,4" rough country lift, 1 1/2 inch wheel spacers, cb and willingness to try anything

Offline Mahana79

  • Rock Crawler
  • ***
  • Posts: 1988
  • Reputation +40/-32
  • "Tech Ninja"
Re: Custom Tuning GM OBD1 Systems
« Reply #2 on: April 29, 2015, 11:26:47 PM »
Only thing I have played with was MegaSquirt for a TBI setup... but that was years ago!!!!
Justin, your shaft is huge and beefy.

His - 1992 Cherokee Laredo, 4.0, AW4, NP231; Rear 8.8 welded w/ G2 cover and 4.88 gears; Front HP30, G2 4.88 gears, Lokka locker, 4340 shafts, Spicer joints with full circle clips, Alloy USA tube seals, Artec truss and brackets; bastard lift with long arms; RE track bar and brackets; 35" trXus MT's on 32 bolt Allied wheels

Hers - 2005 Jeep Liberty CRD, 2.8L VM Motori turbo diesel, 545RFE, NP242, Chry 8.25 29 spline, elephant hose mod, disabled EGR