Author Topic: This is why Paul didn't see two Chevy on moab rim today time to be a spotter  (Read 1663 times)

0 Members and 1 Guest are viewing this topic.

Offline SWAN22

  • Wheeler
  • **
  • Posts: 740
  • Reputation +36/-7
"04" Rubicon, on 36" rubber,4" rough country lift, 1 1/2 inch wheel spacers, cb and willingness to try anything

Offline xlr8n

  • Spotter
  • *
  • Posts: 389
  • Reputation +0/-0
    • Schichtel.net
A few more angles of the spun axle tube.

sent via Tapatalk using a rotary phone

« Last Edit: April 13, 2015, 08:45:41 AM by xlr8n »
Wichita Falls Weather


1973 Chevrolet Luv:
Chassis/Suspension: '72 Waggy frame cut to 103.5" WB ; Waggy front 47" SOA ; Chevy rear 63" SOA
Front axle: '79 J10 D44 4:11 w/ 8 lug outers ; chromoly shafts ; Detroit locker ; cast cover
Rear axle: '75 Corp 14 bolt welded 4:10 ; cast cover ; DOM anti-wrap bar
Tires: 38.5x14.5x15 Swamper SX on 15x8 steel wheels
Drivetrain: '92 s10 4.3 Chevy v6 ; TH350 ; NP203/205 doubler triple sticks (front digs) ; .250 DOM rear shaft ; 2" square front shaft
Steering: Hydrossist ; 1.5" OD .250 wall DOM drag link and tie rod w/ heims
Safety: In-cab DOM cage ; in-bed double roll bar
Amenities: OBA ; OBW ; electric XJ seats ; Schwinn cruise control ; rock lights ; receiver mounted 8K lb. winch ; receiver mounted BBQ pit ; receiver mounted 32cc weedablender ('rita mixer)
Other: Bed mounted Isuzu raditator ; Bobbed bed

Offline Rollin Slow

  • Rock Crawler
  • ***
  • Posts: 1945
  • Reputation +91/-17
  • They call me "T"
That's not good!


Sent from my iPhone using Tapatalk
It's never good when your ball pops out!! ;D                                                                        '97 Wrangler, 5speed, D30, Aussie Locker, 4.88's, 8.8, Aussie Locker, 35X12.50X15's, Advance Adaptors SYE, Tom Woods D.S., Adj. uppers and lowers. Smittybuilt 8,000# winch, Rokmen fuel tank skid,owner made sliders, bumpers and lots of smaller do-dads!

Offline SWAN22

  • Wheeler
  • **
  • Posts: 740
  • Reputation +36/-7
good pics brian
"04" Rubicon, on 36" rubber,4" rough country lift, 1 1/2 inch wheel spacers, cb and willingness to try anything

Offline xlr8n

  • Spotter
  • *
  • Posts: 389
  • Reputation +0/-0
    • Schichtel.net
That's not good!


Sent from my iPhone using Tapatalk

The trail weld around the housing held up okay but the spring didn't. We (Mark) tried straightening it prior to welding but was unable to keep it from springing back out of place. Time for a set of 63 inchers  :headbang:
Wichita Falls Weather


1973 Chevrolet Luv:
Chassis/Suspension: '72 Waggy frame cut to 103.5" WB ; Waggy front 47" SOA ; Chevy rear 63" SOA
Front axle: '79 J10 D44 4:11 w/ 8 lug outers ; chromoly shafts ; Detroit locker ; cast cover
Rear axle: '75 Corp 14 bolt welded 4:10 ; cast cover ; DOM anti-wrap bar
Tires: 38.5x14.5x15 Swamper SX on 15x8 steel wheels
Drivetrain: '92 s10 4.3 Chevy v6 ; TH350 ; NP203/205 doubler triple sticks (front digs) ; .250 DOM rear shaft ; 2" square front shaft
Steering: Hydrossist ; 1.5" OD .250 wall DOM drag link and tie rod w/ heims
Safety: In-cab DOM cage ; in-bed double roll bar
Amenities: OBA ; OBW ; electric XJ seats ; Schwinn cruise control ; rock lights ; receiver mounted 8K lb. winch ; receiver mounted BBQ pit ; receiver mounted 32cc weedablender ('rita mixer)
Other: Bed mounted Isuzu raditator ; Bobbed bed